Product Description
Braced Post: Unique insulator design that combines the cantilever properties of a horizontal line post with the tension strength of a suspension insulator to make a high strength insulator assembly. The suspension insulator, or brace, is attached to the line post and to the tower via connection hardware. When loaded, the brace goes into tension, and is the primary support mechanism for the assembly. The line post provides stability for transverse (tension&compression) & longitudinal loads exerted onto the assembly.
Product Parameters
Identification
A = 1.5" [38mm] (not included) (pole connection offset)
B = Brace Length
C = Brace Angle
H = Assembly Height (Tolerance = +/- 3")
SSL = Suspension Length
PSL = Post Section Length
Standard Strength Braced Posts
- 2.0" Line Post Insulator (1 each)
- 25klb MX Suspension Insulator (1 each)
- SYC-56 Socket Y-Clevis (1 each)
- ASH-55 Anchor Shackle (2 each)
Notes:
- MDCL = Max. Design Cantilever Load (Load Curves provided upon request)
- Electrical Data is derived from the assembly "Strike Distance", without corona rings for 161kV and below. All 230kV Braced Post assemblies supplied with a corona ring (Electrical Values include the corona ring)
- B191 Series supplied with standard G2-0 Bendable Gain Base on line post.
- For Flat Base F2-0, change the "9" in B191… to "1" = B111…[See line post base section for details]
- For Higher Strength or Custom Designs, please complete the Braced Post Request Worksheet at the end of this section and return the competed worksheet to MPS through your local MPS Sales Representative.
Customized Designs include any dimensional changes, strength changes, hardware changes, end fitting changes, etc.
Product structure and advantages
Our company specializes in the production of composite insulators for transmission lines. The main structure is composed of rubber, epoxy glass fiber core and metal end fittings.
Compared with similar ceramic and glass insulators, silicone rubber insulators have the following advantages:
(1) Small size, light weight (1/7~1/10 times that of ceramic insulators with the same voltage), good elasticity of the shed, not easy to break, convenient transportation and installation, and economical.
(2) High mechanical strength. FRP rods have high tensile strength, which is 5-10 times that of ceramic materials. The cross-section of the core material is small, the product is small in size, light in weight, and high in tensile strength. It is easy to manufacture large-tonnage insulators above 300KN.
(3) High antifouling performance and good aging resistance. The silicone rubber injection molded shed has good hydrophobicity and mobility, which makes the insulator have high anti-pollution flashover voltage and good electrical corrosion resistance.
(4) Easy installation and maintenance, which can greatly reduce maintenance costs caused by power outages and manual labor intensity.
(5) The production process is simple and the delivery time is short.
Company Profile
Exhibition
We have been participating in various exhibitions at home and abroad from 2010 to 2020. At the exhibition, relevant people from the industry and us saw our products directly and closely.
Certifications
We have implemented advanced management and set up a strict quality management system according 1- 1509001 : 200S. All the products' quality requirements comply with IEC61109, IEC62231, G3/T19519-2004,GE/T 22079-200s, DU/T 1048-2007.DL/T810-2002 and TE/T3199.2-200g Standards, etc
Packaging & Shipping
All insulators are packed in weatherproof containers in order to protect the products during land, air and sea transportation. Several different grades of packaging can be offered depending on the mode of transport and the expected storage conditions. Special packaging arrangements can be accommodated upon the users' request.
FAQ
1. Q: Are you the factory or trading company?
A: We are factory who was founded in 2008.
2. Q: What're your main products?
A: insulators, the hardware of all kinds for high-voltage applications and related products.
3. Q: Can I get some samples?
A: Yes, sample order is available for quality check and market test.
4. Q: What's your payment terms?
A: We usually accept :Payment Term: 30% T/T after order confirmed, balance 70% before shipment..
5. Q: How can you control your quality?
A: For each production processing, we have a complete QC system for the chemical composition, physical and electrical properties. After production, all the goods will be tested according to related standards, and the ex-factory test reports will be sent along with shipment documents.
6. Q: Does your company accept customization?
A: We accept OEM service.
7. Q: What's your warranty terms?
A: We offer 24 months warranty terms.
8. Q: Do you have the products in stock?
A: Depends on your request, we have standard models in stock. Some special product and big order will be newly produced according to your order.
9. Q: What do you have for the certificate?
A: ISO9001, ISO14001, Type test, CESI etc.
10. Q: How to become the agents for Line?
A: We welcome you to be Line's agent.
We will depend on the sales turn over and also do research on your market. If you have interest, let us discuss more!
11.Q: Can we visit your company?
A: Yes, for sure, you are welcome to visit our company.